If you’re frustrated by your TV cords showing through the wall, it’s time to get crafty and solve the problem once and for all.
Here are nine great ways to hide TV cords on your wall so they’re out of sight and out of mind, making watching TV more enjoyable and less frustrating.
While these ideas range from simple to intricate, you can pick anyone that best fits your needs—or try them all!
You’ll find that no matter which idea you choose, it’s the perfect way to hide TV cords on your wall!
1) Use a power strip
A power strip is one of the easiest ways to tidy up cords, especially if you’re already using it for other appliances.
Use a power strip like a 12-outlet model and position it behind your entertainment center.
The best placement for an in-wall version would be near a standard receptacle, but that’s not always practical.
That said, any nearby outlet will do as long as it’s nearby (within 10 feet or so). For cord clutter that spans a considerable distance, usually behind your entertainment center, you’ll need a remote extension cord.
Plug the end of the extension cord into the power strip and then plug the power strip into an outlet.
Push the other end of the extension cord along the wall until it reaches its final destination, such as a lamp next to your couch.
When you turn off all devices plugged into the power strip, only one wire will come out of it.
2) Hiding your cables behind a painting
Using an old painting you no longer like, hang it over your fireplace or another high-up wall near the television. The cables will be hidden this way.
Or, you can use a combination of two pieces of furniture to cover your cable mess: First place a flat screen on top of the cabinet with doors.
Then stand the cabinet next to a second cabinet with doors in front and open the front doors to reveal the television’s hiding spot.
If you’re looking for something smaller and more portable, try combining a table lamp (with a short stem) with an end table that has drawers (instead of just shelving).
Put the end table next to your couch and place it so that only its backside is visible when you look at it from where you normally sit on your couch.
3) Install metal plates to cover outlets
Installing metal plates over your outlets or recessed power outlet covers can make hiding wires a whole lot easier.
Getting rid of open outlets and replacing them with something that doesn’t stick out like a sore thumb is an easy way to avoid the chaotic look of dangling cords.
Metal plates also prevent dust and dirt from accumulating inside of your wall, so they’re an excellent choice for those that hate sweeping every other day.
Recessed electrical outlet covers are popular as well because they create the illusion that there’s nothing behind your walls at all. They come in many different shapes and sizes, too, so you should be able to find one that will fit into your design scheme nicely.
Here’s how to fit them: Start by cutting around the plate with wire cutters. Then push it through the hole using a screwdriver, being careful not to poke any of your fingers in the process.
If you’ve cut around it correctly, it should easily pop back out through the hole without much force.
To install a cover over your outlet or recess cover simply slide it up against the plate and screw it into place.
4) Covering your walls with shelving units
The easiest way to conceal wires is by mounting your television on the wall and covering them with shelving units.
Shelves can be installed directly behind or beside the television, and by arranging them carefully, you can also hide other items such as media consoles, surround sound speakers and DVD players.
Remember, shelves are not just for hanging things on; they are also used for storage. Conceal cords by simply hiding them inside the shelf.
5) Going wireless
Wireless technology has come a long way in recent years, and it is only going to continue improving.
The problem with wireless TVs is that the image can start pixelating if you are too far away from the TV. On the other hand, Wi-Fi signals can be disrupted by your home’s layout or other electronics.
To help minimize these problems, think about where you would like your television to be mounted and adjust accordingly before investing in a new wireless model.
You may also want to install some wireless receivers around your house so that there is no dead zone for the reception.
There are still a few glitches here and there, but wireless technology isn’t as bad as people say it is and should work well enough for most people’s homes.
6) Use drywall paint as an outlet cover up
The easiest way to conceal those pesky cords is with a simple can of drywall paint. Using the same technique, you can also paint the outlet covers and have them blend in with the wall.
Simply apply your desired color using a roller, letting it cover most of the face (or other light-colored area) without worrying about drips. After that’s done, take a sponge and run over your paint until you create an even texture.
7) Use cables clips
Cable clips are a great option for hiding cables, or at least making them look a little better. There are different types of clips, and each type has benefits that make it better suited for certain situations.
In general, using a couple different clips can really make the job of hiding your cables that much easier. Just be careful not to obscure any HDMI or electrical plugs you may need access to. Here’s how to use them:
Cable tidies
Cable tidies have a looped design with an open slot in the middle, so they’re great for organizing multiple cables together. These work well when there is an open wall space behind where you’re installing them.
End caps
End caps come in various sizes and styles, but they all attach to one end of your cable bundle and provide protection from damage while providing some neat organization.
Basket clamps
Basket clamps work best when there is room behind where they will be installed. They also work well when used in pairs to create visual separation between cables without obscuring anything too important.
8) Pull your cables through the back of your furniture
Pull your cables through the back of your furniture. Not only will this minimize the visibility of cables, but it will also give you a nice clean look with no cords visible.
This is a great solution for people who have floor lamps or plants near their television. To pull your cables through, you can use holes drilled into one side of the furniture and cable channels installed on the other side.
Slide the channel over and under the legs until you have pulled all of the cords out from underneath.
The installation should take no more than an hour using a cordless drill and basic carpentry skills.
9) Buy expensive looking cable covers
One way to hide the cords that are ruining your beautifully decorated room is with a cable cover. Cable covers come in many shapes and sizes, and they can be purchased in an array of different colors.
There are also affordable ways you can make your own. One idea is purchasing a piece of fabric, cutting it so that it matches the width of the back of your furniture and then running a wire along its edges through some eyelets or grommets.
Some popular variations include velcro or t-shirts. Another solution for hiding the wires is finding a corner wall and putting hooks in there.
Then hang one end of your cables over each hook.
For example, if you have two TVs hooked up to one set of cables, put hooks across from each other so that when you hang them both over them, they will meet on top where the cables meet.
If you need more than two hooks but don’t want more visible holes in your wall, find out where studs are located and use these as anchors for more hooks.
Conclusion
Covering your cords is an easy way to hide them and make your decorating look more polished. We showed you 9 ways how to hide tv cords on your wall and we hope you found it helpful!
Also, check out “how to hang a flag on a wall“, “DIY wall decor ideas“, and “succulent wall planter“. For more similar content, check out our homepage.