How to hang plates on the wall is a question rarely asked because the tasks seems like an easy thing to do. However, you can ruin them if you do it wrong.
Fortunately, you can hang them right with these simple and effective hanging plate tips! Your collection will be the envy of your friends when they come over, so let’s get started!
Consider your Hanging Options
If you’re hanging plates, you’ll want to find a wall that’s flat and doesn’t have any seams or moldings.
The best way to do this is by painting the wall a uniform color and making sure there are no pieces of trim sticking out.
From there, it’s simply a matter of finding a spot for your plates and then measuring how far apart they need to be in order to hang them all with as little space between them as possible.
For example, if you have six plates that need hung, measure 5 inches from one plate to the next plate.
Place your first plate 5 inches from the left edge of the wall and mark where it needs to be mounted with a pencil or pen.
Next, use a level to make sure the plate is straight before securing it into place. Then add two more plates over the course of 2-3 inches along that line before repeating until you’ve reached your desired number of plates.
Determine Your Plate Size
If you’re looking for an easier way to hang your plates, it’s best to measure them first. You can use a ruler or a measuring tape and a piece of string.
Tie the string onto one plate and then measure from the top of the plate at its widest point.
Then tie the string onto a second plate and measure from the top of the plate at its widest point.
If you have two plates that are exactly 10 inches wide, you’ll need two nails that are about 3 inches long for each nail hole in order for them not to be too close together or too far apart.
And if they’re both 6.5 inches wide, you’ll need two nails that are about 2.75 inches long per nail hole so they don’t end up being either too close together or too far apart as well.
Fasten the Plate to the Wall Safely
There are two ways of attaching plates to a wall. The first is by using a plate hanger which will securely hold your plate in place.
You can find these at most hardware stores, and they come in different sizes depending on the weight of your plate.
You will want to measure carefully before purchasing one, as they are not always adjustable. The other way is with screws and anchors, which is a more permanent solution.
Place Hangers in Appropriate Locations
Hanging plates on a wall is a great way to display your collection and make them part of your home decor.
The first thing you’ll need is hangers, which you can buy at any hardware store or big box retailer.
Then, measure the width of your wall and divide it in half.
Place one hanger that’s close to half from the top of the wall in one corner, then place two more hangers that are close to halfway from the floor in each other corner.
If you want even spacing between each plate, divide your desired number of plates by four for how many inches you should space each hanger apart from its neighbor.
For example, if you have three plates, hang them about nine inches apart from one another.
Hang Smaller Items First
Hanging plates on the wall can be a tricky task, but with these tips, you’ll be able to hang them with ease. Step one: hang smaller items first so they act as your guides for where to place other items.
We recommend using narrow hooks for hanging plates and cups. Step two: make sure that you have enough space between the plate and the wall so that there’s room for air circulation, which will help prevent mold from growing.
A good rule of thumb is at least six inches of space between each item and the wall.
Step three: use a level when hanging items from ceiling-mounted hooks because if your items are crooked, it can ruin their balance and also feel awkward when you walk by them.
Take Pride in Your Work!
The best way to hang plates securely and safely is by using a plate hanger. If you don’t have one, I recommend getting one.
You can buy them at any store that sells home décor or online
Determine where you want to hang your plates on the wall. It’s usually better if they’re close together in order for them not to be too overwhelming.
Start by measuring out how far apart you want your plates by marking off the space with pencil marks or masking tape so that you know where each plate will go once it’s hung up!
From there, mark out an area of the wall that’s large enough to fit all of your plates, and make sure there are no outlet covers, electrical outlets, or water pipes in this area.
Now drill holes into the drywall using a power drill and bits that are slightly smaller than the hooks of your plate hangers.
Remember to always wear eye protection when drilling holes into drywall because drywall dust can get very messy.
Once you’ve drilled all of your holes into the drywall, take two hooks from each plate hanger and put them over both ends of each screwdriver shaft on their side.
Push down firmly on both sides of the plate hangers until they push through both sides of the hole from behind like an anchor.
Conclusion
Now that you know how to hang plates, be sure you have the right tools and materials before you get started.
Keep in mind that hanging plates take time and patience, but it’s well worth it when you see them displayed beautifully.
You’ll also enjoy “how to hang patio lights” and “how to hang pegboard.”